Model: SH-800HT
Main features: insulation high temperature resistance, acid and alkali resistance, high compression ratio, high rebound (can replace Rogers HT-800, HT-850/BF-1000, etc.)
Typical specifications: coil thickness: 0.5~15mm, width: 300~500mm, length: 5m-50m
Material composition: 1, silica gel 2, polymer
Main Uses: environmental sealing, protection of outdoor equipment, dust, moisture, air tight or shade, such as lighting, HVAC equipment and electrical control cabinets.
Isolation of electronics and vehicle interiors; Cushion gaskets and washers.
| Test Item | Test number value | Test Unit | Test Method |
| Foam type | Closed cell foaming | --- | --- |
| Hardness | 45~55 | Shore00 | ASTM D 2240 |
| Density | 0.35~0.66 | g/cm3 | GB/T 6343-1995 |
| ASTM D 1667 | |||
| Termal Conductivity | ≥0.1 | W/m.k | ASTM D 5470 |
| Water Vapor Permeability | ≤0.10 penetration inch | Kg/Pa.s.m | GB/T 17146-1997 |
| （0.15×10-12） | ASTM-E96 | ||
| Water Absorption | ≤5 | % | GBT 17794-2008 |
| ASTM_D1056_C | |||
| Thermal Stability（%shrinkage） | ≤10 | % | GBT 8811-2008 |
| Flammability&Smoke Density | V0 | --- | ASTM D 635 |
| compression ratio（Different vertical pressure） | 10.6~50.9(under 5kg pressure) | % | Under the same pressure, the thicker the thickness, the greater the compression ratio |
| Temperature Endurance | -40~250 | ℃ | --- |
| ROHS test | Up to standard | --- | ROHS |
